Servicing Perth & the Peel region · 17 Pinjarra Road, Mandurah WA 6210

← Back to the blog

Ducted Reverse Cycle Air Conditioning: A Perth Homeowner’s Guide

22 November 2026

By the My HVAC Experts team

Bright living room with sofa and wooden table

Ducted reverse cycle air conditioning is one of the most popular ways to heat and cool a whole home in Perth. It’s discreet, it can be zoned, and one system handles both summer and winter. But it’s also a significant investment, so it pays to understand how it works before you commit.

This guide covers the essentials, from how the system moves air around your home to what affects running costs.

How ducted reverse cycle works

A ducted system has three main parts: an outdoor unit, an indoor unit (sometimes called the fan coil) installed in the roof space or under the floor, and a network of insulated ducts. Air from your home is drawn in through a return air grille, passes over the indoor coil where it’s cooled or heated, and is then pushed through the ducts to outlets in each room.

In summer, the refrigerant cycle removes heat from indoor air and releases it outside. In winter, the cycle reverses, drawing heat from outdoor air and delivering it inside. That’s why it’s called reverse cycle.

Why it suits Perth homes

  • Perth’s hot summers and mild winters are well suited to reverse cycle
  • Most Perth homes have pitched roofs with space for ducts
  • Whole-home comfort, including bedrooms on hot nights
  • Discreet ceiling outlets with nothing on the walls
  • Can replace both evaporative cooling and gas heating with one system

Zoning

Zoning lets you divide the home into areas, such as living and bedrooms, controlled separately. You can cool only the zones you’re using, which improves comfort and reduces running costs. Some systems also offer individual room temperature control.

Sizing a ducted system

Ducted systems are sized for the whole home, considering total floor area, ceiling height, insulation, windows, orientation and the number of zones likely to run at once. An oversized system wastes money; an undersized one struggles on hot days. Duct design also matters, so each room gets the right amount of air.

What affects cost

  • System capacity
  • Number of zones and outlets
  • Roof space access and complexity
  • Single or two-storey home
  • Controller type and features
  • Removal of existing systems
  • Electrical upgrades

Every home is different, which is why an in-home assessment and written quote are important.

Installation

Installation usually takes one to several days. Technicians install the indoor unit in the roof, run ducts to each room, cut in outlets and the return air grille, install the outdoor unit, connect refrigerant pipes and electrical, then commission and test the system.

Running costs

Running costs depend on system size, efficiency, how many zones you run, your settings and your electricity plan. Zoning, sensible temperatures and good insulation make a big difference. If you have rooftop solar, running the system during the day can help.

Maintenance

Clean the return air filter regularly, and book air conditioning servicing to keep the system efficient. Regular servicing checks the indoor and outdoor units, drains, zones and controls.

What a good ducted design looks like

A good ducted design starts with a room-by-room heat load assessment. From there, the designer chooses a system capacity, decides where the indoor unit will sit in the roof, plans duct sizes and routes, and places outlets so air reaches each room evenly. Return air grilles are positioned so air can flow back to the unit easily.

Shortcuts in design are the most common reason ducted systems underperform. Undersized ducts, too few outlets or a badly placed return can leave some rooms hot no matter how big the system is.

Roof space considerations

Ducted systems need space in the roof for the indoor unit and ductwork. Most Perth homes with pitched tile or metal roofs have enough room. Low-pitched roofs, flat roofs or roofs with lots of framing can make installation harder. The installer will check access, height and the condition of the ceiling before quoting.

Running costs and zoning

Ducted systems can cool a whole home, but most of the time you don’t need every room cooled at once. Zoning lets you cool living areas during the day and bedrooms at night, which reduces running costs. With an inverter system and sensible settings, ducted can be efficient for the comfort it delivers.

Maintenance for ducted systems

Clean the return air filter every few months, more often with pets or dust. Book a professional service yearly to check the indoor unit, outdoor unit, drains and zone motors. Over time, ductwork can get damaged by rodents, tradespeople or heat, so it’s worth having it checked if a room suddenly stops cooling.

Common questions from Perth homeowners

People often ask whether ducted can replace an old evaporative system, whether existing gas ducted can be converted, and whether ducted will work in a two-storey home. The answer to all three is often yes, but each depends on the home. We look at the existing ductwork, roof space and layout before recommending a path.

Installation timeline

Most ducted installations in existing Perth homes take one to three days, depending on the size of the home, roof access and the number of zones. New builds can be done in stages as construction progresses. We’ll give you a clear timeline when we quote.

Is ducted right for you?

If you want whole-home comfort, discreet looks and one system for heating and cooling, ducted air conditioning is worth considering. We’ll assess your home and give you honest advice.

Thinking about ducted?

Call My HVAC Experts on 08 6156 7042 to book an in-home ducted assessment.

Related reading: Zoning Your Ducted System: How to Set It Up Well

Frequently asked questions

How does ducted reverse cycle work?

An indoor unit in the roof conditions air, which is delivered through ducts to outlets in each room. The cycle reverses to heat in winter.

Is ducted suitable for all homes?

Most Perth homes with pitched roofs are suitable, but low or flat roofs may limit options.

How long does ducted installation take?

Usually one to several days, depending on the home and system.

Can I zone my ducted system?

Yes. Zoning lets you control areas separately and reduce running costs.

How often should ducted be serviced?

Regular servicing, often yearly, plus cleaning the return air filter, helps keep it efficient.

HV

My HVAC Experts

Perth and Peel air conditioning and heat pump specialists based at 17 Pinjarra Road, Mandurah. Honest advice, correctly sized systems and tidy installs. Call 08 6156 7042.

Want it sized for your home?

We assess your home first, then recommend a system that fits.

Request a Quote →

On this page

    Share this article