Servicing Perth & the Peel region · 17 Pinjarra Road, Mandurah WA 6210
Split system air conditioning
A split system is one of the simplest ways to make a room comfortable year round. Getting the size, placement and installation right is what makes it work well for years.
Split systems are efficient, quiet and relatively affordable to install. Most are reverse cycle, so they cool in summer and heat in winter. They're a great fit for bedrooms, home offices, open-plan living areas and apartments, and you only run the rooms you're using.
Split systems are rated in kilowatts. A small bedroom might need a compact unit, while a large open-plan living area with high ceilings and west-facing glass may need something much bigger. We measure the space and look at insulation, ceiling height, window size and direction and how the room is used before recommending a size.
An undersized unit struggles on hot days. An oversized unit can cycle on and off too often, which wastes energy and doesn't control humidity as well. Getting it right matters more than the brand name on the front.
Indoor units placed to spread air across the room, not straight onto a bed or couch
Outdoor units with good airflow, out of direct afternoon sun where possible
Short, neat pipe runs for better efficiency
Condensate drains that run away from walls and paths
Coastal homes: placement and protection that reduce salt exposure
If you want to cool and heat several rooms but don't want ducting, a multi-head split system connects several indoor units to one outdoor unit. It can be a neat option for homes with limited outdoor space, though each setup has trade-offs we'll explain.
Most back-to-back installs, where the indoor and outdoor units are on either side of the same wall, are completed in a few hours. Longer pipe runs, two-storey homes and difficult access take longer. Some homes need an electrical upgrade or a dedicated circuit, which we'll identify in your quote.
We'll show you how to use the remote, set up timers and clean the filters before we leave.
Modern inverter split systems adjust their speed to hold the temperature rather than switching on and off. Setting the thermostat sensibly, around 24 to 25 degrees in summer and 18 to 20 in winter, closing doors and curtains and keeping filters clean all help keep running costs down.
Most major brands make reliable split systems. What matters more is choosing the right capacity, an efficient inverter model and features you'll actually use, such as Wi-Fi control, quiet night modes or air filtration. We'll recommend models we're confident in and explain the differences in plain English, including energy ratings and warranty terms.
If you already have a brand in mind, tell us. We'll let you know if it suits your room and budget.
Older systems, especially those more than ten to fifteen years old, are often less efficient than modern inverter units and may use refrigerants that are being phased down. If yours is noisy, struggling or needing frequent repairs, replacement can improve comfort and running costs. We'll check whether existing pipework and electrical can be reused safely or should be replaced.
Your quote will show the unit, the installation type and anything extra, so you can compare it fairly with other quotes.
FAQ
Straight answers about split system installation in Perth.
How long does a split system installation take?
A standard back-to-back installation often takes a few hours. Longer pipe runs, two-storey homes or electrical upgrades can take longer.
What size split system do I need?
It depends on the room size, ceiling height, insulation, windows and use. We measure and assess the room before recommending a size.
Can a split system heat as well as cool?
Most modern split systems are reverse cycle, which means they can both cool and heat.
Where should the outdoor unit go?
Somewhere with good airflow, reasonable access for servicing and, where possible, out of harsh afternoon sun. We'll suggest the best spot for your home.
Will I need electrical work?
Some installs need a dedicated circuit or switchboard upgrade. We'll check during the assessment and include any work in your quote.
Are multi-head systems a good idea?
They can suit homes with limited outdoor space, but they have trade-offs in cost and flexibility. We'll explain whether one makes sense for you.
How often should I clean the filters?
Every few weeks during heavy use is a good habit. A professional service is usually recommended yearly.
Do you install in apartments?
Yes, subject to building and strata approval for outdoor unit placement and pipe runs.
Do split systems need regular servicing?
Yes. A yearly clean of the filters, coils and drain keeps airflow strong and running costs down. We can service systems we did not install.
Can you install a split system in a bedroom?
Yes. A single-room split system suits bedrooms and home offices well. We size the unit to the room, choose a quiet indoor position and keep the pipework neat.
Want a cooler bedroom or a living area that's comfortable all year? Call My HVAC Experts on 08 6156 7042 for a split system quote that's based on your actual room.