A split system in the bedroom can transform hot Perth summer nights. But where you put it matters. The wrong spot can mean cold air blasting onto your face all night, or a room that never feels evenly cool.
Avoid blowing directly on the bed
Cold air blowing straight onto you while you sleep can be uncomfortable and may cause a dry throat or stiff neck. Ideally, place the unit so air flows across the room, not directly at the bed.
Above the bed?
Placing the unit above the bedhead can work well, because air blows away from you and across the room. Make sure the drain is well installed, and the unit is serviced regularly, so there’s no chance of drips.
Opposite wall
Placing the unit on the wall opposite the bed can blow air directly at you. If this is the only option, adjust louvres to direct air upward or to the side.
Side wall
A side wall can be a good compromise, allowing air to flow across the room and past the bed rather than onto it.
Height and clearance
Indoor units need clearance above and to the sides for airflow, and should be high enough to spread air across the room. Avoid placing them where curtains or wardrobes block airflow.
Noise
Choose a quiet model and use night or sleep mode. Place the outdoor unit away from bedroom windows where possible.
Avoiding sleep disruption
Many people prefer the indoor unit on a wall where it doesn’t blow directly over the bed. Air moving across your face all night can feel uncomfortable and dry. Mounting it on a side wall, or across from the foot of the bed, lets cool air spread through the room more gently.
Sleep mode on most systems slowly adjusts the temperature overnight so you’re not too cold by early morning.
Children’s rooms
In children’s bedrooms, think about where cots and beds might move as kids grow. Choose a spot that works for several layouts. Keep the remote out of reach of small children, or use app control to manage settings.
Practical placement rules
- Mount the unit high on the wall, with clearance above for airflow
- Avoid placing it directly above the bed head
- Keep it away from curtains that could block airflow
- Choose a wall with a sensible route for pipes and drain to the outside
- Consider where the outdoor unit will sit and whether it’ll be near a neighbour’s bedroom
Sizing for bedrooms
Bedrooms usually need smaller split system air conditioning units. West-facing bedrooms or those under hot roofs may need more capacity.
Planning a bedroom split system?
Call My HVAC Experts on 08 6156 7042 for advice on placement and sizing.
Related reading: Multi-Head Split Systems: Pros, Cons and When They Make Sense
Frequently asked questions
Is it OK to put a split system above the bed?
Yes, it often works well, as air blows away from you. Make sure the drain is well installed.
Should the air conditioner blow on the bed?
Ideally not. Air should flow across the room.
What size split system for a bedroom?
It depends on the room, but bedrooms usually need smaller units.
How do I reduce noise in the bedroom?
Choose a quiet model, use sleep mode and place the outdoor unit away from windows.
Can I adjust the airflow direction?
Yes. Louvres can be adjusted to direct air away from the bed.