Servicing Perth & the Peel region · 17 Pinjarra Road, Mandurah WA 6210

← Back to the blog

What Size Air Conditioner Do You Really Need?

31 October 2026

By the My HVAC Experts team

Bright modern living room with a wall-mounted split system air conditioner

Ask ten people how big an air conditioner should be and you’ll get ten answers. Online calculators give a rough idea, but they often ignore the things that matter most in Perth homes. Here’s what actually affects sizing.

Floor area is only the start

Most rules of thumb start with the floor area of the room. That’s a useful starting point, but two rooms of the same size can need very different capacities.

Factors that change the size you need

  • Ceiling height: raked or high ceilings mean more air to cool.
  • Windows: large windows, especially west-facing, let in a lot of heat.
  • Shading: eaves, awnings and trees reduce heat gain.
  • Insulation: well-insulated ceilings and walls reduce the load.
  • Occupants and appliances: people, ovens, TVs and computers add heat.
  • Open-plan layouts: open areas connected to kitchens or stairwells need more capacity.

Why undersizing is a problem

An undersized system runs flat out on hot days and still can’t reach the set temperature. It works harder, uses more energy and may wear out faster. You’ll notice it most on 40-degree afternoons.

Why oversizing is a problem too

Bigger isn’t always better. An oversized system cools the room quickly and then cycles off, without running long enough to remove humidity. Rooms can feel cool but clammy. You’ll also pay more upfront for capacity you don’t need.

Heating capacity

Reverse cycle systems have a separate heating capacity rating. For most Perth homes, sizing for cooling also covers heating, but it’s worth checking if heating is your main priority.

Why rules of thumb only get you so far

You’ll often see sizing charts that match room area to kilowatts. They’re a useful starting point, but they assume an average room. In Perth, two rooms of the same size can need very different capacity. A shaded, south-facing bedroom in a double brick home might be comfortable with a small unit, while a west-facing room with a large window and a low, poorly insulated ceiling might need much more.

That’s why a proper heat load assessment looks at the room, not just the floor plan.

Factors that push capacity up

  • West or north-facing glass without external shading
  • High or raked ceilings
  • Poor or missing ceiling insulation
  • Open-plan spaces that connect to kitchens or stairwells
  • Upstairs rooms under a hot roof space
  • Lots of people, appliances or computers in the room
  • Lightweight construction such as a timber-framed extension

Factors that bring capacity down

  • Double brick walls that slow heat entering the home
  • Good ceiling insulation
  • Eaves, awnings and external blinds
  • South or east-facing rooms
  • Rooms that can be closed off with doors

Improving shading or insulation before installing can sometimes mean a smaller, cheaper-to-run system will do the job.

Heating capacity matters too

If you plan to use reverse cycle for heating, check the heating capacity as well as the cooling capacity. Most units list both. In Perth, cooling demand usually drives the size, but rooms in the hills or homes with poor insulation can have higher heating needs on frosty mornings. A good recommendation checks both numbers.

What happens when a system is undersized

An undersized system runs flat out on hot days and still struggles to reach the set temperature. You’ll notice it most during a run of 40-degree days, which is exactly when you need it. Running at maximum for long periods also means more wear and higher running costs than a correctly sized unit cruising at part load.

What happens when a system is oversized

Bigger isn’t automatically better. An oversized system can cool the room quickly and then cycle off, which may leave the air feeling clammy because it hasn’t run long enough to remove moisture. It also costs more upfront. Modern inverter systems handle oversizing better than older fixed-speed units, but getting the size right is still the goal.

Our sizing process

When we assess a room, we measure it, note the orientation, windows, ceiling height and insulation, and ask how you use the space. Then we recommend a capacity range and explain why. If there are two sensible options, we’ll show you both and explain the trade-offs so you can make the call.

Sizing for ducted systems

With ducted systems, sizing is more complex. The designer looks at every room, adds up the heat loads and considers which zones are likely to run at the same time. Because you rarely cool every room at once, the system doesn’t necessarily need to match the total of every room’s maximum load. Getting this balance right avoids an oversized system that costs more upfront and an undersized one that struggles on the hottest days.

Questions to ask your installer

  • What capacity are you recommending, and why?
  • Did you consider the room’s orientation and windows?
  • What’s the heating capacity?
  • Would a larger or smaller unit be a reasonable alternative?

Get a proper assessment

An in-home assessment considers all of these factors. We’ll measure, look at windows and insulation and recommend the right split system air conditioning or ducted capacity for your home.

Want your room sized properly?

Call My HVAC Experts on 08 6156 7042 to book a measure-up.

Related reading: Kilowatts Explained: Reading Air Conditioner Capacity Without the Jargon

Frequently asked questions

Can I size an air conditioner by floor area?

Floor area is a starting point, but ceiling height, windows, insulation and use all affect the size you need.

Is it better to go bigger?

Not always. Oversized systems can cycle on and off and leave rooms feeling clammy.

What happens if my air conditioner is too small?

It will struggle on hot days, run constantly and may not reach the set temperature.

Do west-facing rooms need bigger systems?

Often, yes, because afternoon sun adds significant heat.

Do you offer in-home assessments?

Yes. We assess your home before recommending a system.

HV

My HVAC Experts

Perth and Peel air conditioning and heat pump specialists based at 17 Pinjarra Road, Mandurah. Honest advice, correctly sized systems and tidy installs. Call 08 6156 7042.

Want it sized for your home?

We assess your home first, then recommend a system that fits.

Request a Quote →

On this page

    Share this article